mbar to MPa — convert millibars to megapascals
Exact 1 ÷ 10,000 = 0.0001
1 millibar in other units
| Pascals | 100 | Pa |
|---|---|---|
| Hectopascal | 1 | hPa |
| Kilopascals | 0.1 | kPa |
| Megapascals | 0.0001 | MPa |
| Bar | 0.001 | bar |
| Standard atmospheres | 0.000986923267 | atm |
| Pounds per square inch | 0.01450377 | psi |
| Torr | 0.75006168 | Torr |
| Millimetres of mercury | 0.75006158 | mmHg |
| Inches of mercury | 0.02952998 | inHg |
mbar to MPa at a glance
| Millibars | Megapascals |
|---|---|
| 1 mbar | 0.0001 MPa |
| 2 mbar | 0.0002 MPa |
| 3 mbar | 0.0003 MPa |
| 5 mbar | 0.0005 MPa |
| 10 mbar | 0.001 MPa |
| 20 mbar | 0.002 MPa |
| 25 mbar | 0.0025 MPa |
| 50 mbar | 0.005 MPa |
| 100 mbar | 0.01 MPa |
| 250 mbar | 0.025 MPa |
| 500 mbar | 0.05 MPa |
| 1,000 mbar | 0.1 MPa |
How to convert millibars to megapascals
Multiply by 0.0001 — one millibar is 0.0001 megapascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 1 ÷ 10,000 = 0.0001
What these units are
The millibar and the megapascal are covered in the pressure unit guide, along with every other unit on this page.
Questions
How many megapascals are in a millibar?
One millibar is 0.0001 megapascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 1 millibar in megapascals?
1 millibar is 0.0001 megapascals. The working is 1 ÷ 10,000 = 0.0001.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.