10 psi to kPa — 10 pounds per square inch in kilopascals
Exact 10 × 6.894757 = 68.947573
10 pounds per square inch in other units
| Pascals | 68,947.57 | Pa |
|---|---|---|
| Hectopascals | 689.475729 | hPa |
| Kilopascals | 68.947573 | kPa |
| Megapascals | 0.06894757 | MPa |
| Millibars | 689.475729 | mbar |
| Bar | 0.68947573 | bar |
| Standard atmospheres | 0.68045964 | atm |
| Torr | 517.149326 | Torr |
| Millimetres of mercury | 517.149252 | mmHg |
| Inches of mercury | 20.360207 | inHg |
psi to kPa at a glance
| Pounds per square inch | Kilopascals |
|---|---|
| 1 psi | 6.894757 kPa |
| 2 psi | 13.789515 kPa |
| 3 psi | 20.684272 kPa |
| 5 psi | 34.473786 kPa |
| 10 psi | 68.947573 kPa |
| 20 psi | 137.895146 kPa |
| 25 psi | 172.368932 kPa |
| 50 psi | 344.737865 kPa |
| 100 psi | 689.475729 kPa |
| 250 psi | 1,723.69 kPa |
| 500 psi | 3,447.38 kPa |
| 1,000 psi | 6,894.76 kPa |
How to convert pounds per square inch to kilopascals
Multiply by 6.894757 — one pound per square inch is 6.894757 kilopascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 10 × 6.894757 = 68.947573
In words: about sixty-nine kilopascals.
What these units are
The pound per square inch and the kilopascal are covered in the pressure unit guide, along with every other unit on this page.
Questions
How many kilopascals are in a pound per square inch?
One pound per square inch is 6.894757 kilopascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 10 pounds per square inch in kilopascals?
10 pounds per square inch is 68.947573 kilopascals. The working is 10 × 6.894757 = 68.947573.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.