10 bar to MPa — 10 bar in megapascals
Exact 10 ÷ 10 = 1
10 bar in other units
| Pascals | 1,000,000 | Pa |
|---|---|---|
| Hectopascals | 10,000 | hPa |
| Kilopascals | 1,000 | kPa |
| Megapascal | 1 | MPa |
| Millibars | 10,000 | mbar |
| Standard atmospheres | 9.869233 | atm |
| Pounds per square inch | 145.037738 | psi |
| Torr | 7,500.62 | Torr |
| Millimetres of mercury | 7,500.62 | mmHg |
| Inches of mercury | 295.299833 | inHg |
bar to MPa at a glance
| Bar | Megapascals |
|---|---|
| 1 bar | 0.1 MPa |
| 2 bar | 0.2 MPa |
| 3 bar | 0.3 MPa |
| 5 bar | 0.5 MPa |
| 10 bar | 1 MPa |
| 20 bar | 2 MPa |
| 25 bar | 2.5 MPa |
| 50 bar | 5 MPa |
| 100 bar | 10 MPa |
| 250 bar | 25 MPa |
| 500 bar | 50 MPa |
| 1,000 bar | 100 MPa |
How to convert bar to megapascals
Multiply by 0.1 — one bar is 0.1 megapascals. That factor is exact: it comes from the definition of the units rather than from a measurement, so it will not change and does not need rounding.
Working 10 ÷ 10 = 1
In words: one megapascal.
Questions
How many megapascals are in a bar?
One bar is 0.1 megapascals. This figure is exact — it comes from the definition of the unit, not a measurement.
What is 10 bar in megapascals?
10 bar is 1 megapascal. The working is 10 ÷ 10 = 1.
What pressure should my tyres be?
Look at the sticker in the driver's door frame or the fuel flap, not the number moulded into the tyre — that one is the tyre's maximum, not the manufacturer's recommendation. Most cars sit somewhere around 32 to 35 psi, which is roughly 2.2 to 2.4 bar.
Is my tyre gauge measuring absolute or gauge pressure?
Gauge pressure — the amount above the surrounding air. A tyre reading 32 psi actually contains about 46.7 psi absolute, because atmospheric pressure of roughly 14.7 psi is already pressing on the other side of the gauge. Conversions on this page are between units, and leave that distinction alone.
Why do weather forecasts use hectopascals and millibars interchangeably?
Because they are the same size. One hectopascal is exactly one millibar, so the change from mbar to hPa was a relabelling rather than a conversion. Standard sea-level pressure is 1013.25 of either.
What is the difference between torr and mmHg?
Almost nothing, and the difference is deliberate. A torr is exactly one seven-hundred-and-sixtieth of a standard atmosphere; the conventional mmHg is defined as exactly 133.322387415 pascals. They diverge by about one part in seven million — invisible in medicine, occasionally not in vacuum work.